Design tool · QR codes
Make a QR code with your own colours and logo
Paste anything, choose an error-correction level and watch the matrix build itself. Every step of the QR standard is implemented here — Reed-Solomon error correction, block splitting, mask selection, format and version information — with no library and no network request. Save a PNG or a scalable SVG when it looks right.
1 · Content & error correction
byte mode · UTF-82 · Size & colour
21 × 21 modules3 · Logo (optional)
noneType qrSelfCheck() in the browser console to run the encoder's own self-check: it rebuilds a symbol and reads the format information back out of the finished matrix.
Reliability
what a scanner will seeHow to use QR Code Generator
Everything below runs in this tab. Nothing is uploaded, and no account is needed.
Step by step
- Type or paste the content into Content to encode. Anything goes: a URL, plain text, an e-mail address or a Wi-Fi string. The byte count under the field is the UTF-8 length, which is what the standard counts.
- Choose the error-correction level. L survives about 7% damage, M about 15%, Q about 25% and H about 30%. Higher levels need a bigger symbol, so the version readout moves as you change it.
- Set the module size, the quiet zone in modules, the module shape and the two colours. The contrast readout tells you whether a scanner will be able to tell the modules apart.
- If you want a logo, upload an image and set its size as a percentage of the code. The panel warns you when it covers too much of the symbol or when the error-correction level is too low to absorb it.
- Press Download PNG for a raster file at the pixel size you chose, or Download SVG for a vector file with the logo embedded. Nothing is uploaded at any point.
Details and limits
What error correction really buys
The level is the share of the symbol that can be destroyed and still decode: about 7% for L, 15% for M, 25% for Q and 30% for H. It is spent on damage, dirt and a logo, not on making the code prettier. A level of Q or H is the usual choice when a logo sits in the middle, because the missing modules are covered by the redundancy the level adds.
Colour, contrast and the quiet zone
Scanners look for the three finder patterns first, then sample each module against its neighbours. Dark modules on a light background is the safe arrangement: inverted codes are rejected by many readers. Keep the contrast ratio above 4.5 to 1, and keep the quiet zone at four modules or more, because a symbol that touches the edge of a page is often not recognised at all.
A logo costs you modules
The centre of a QR code carries data, so covering it destroys real codewords. The panel measures how many dark modules fall under the logo box and warns above a quarter of them. Around 20% of the width is a practical ceiling, and below Q the recovery margin is thin enough that a scratched print will fail.
Byte mode, and what that means
This encoder uses byte mode with UTF-8, which is the mode every reader supports and the one that carries any language. Numeric and alphanumeric modes pack more characters into the same symbol, so a code made here may be a version larger than one from a tool that uses them. Structured append, ECI headers and Kanji mode are not implemented.
Read the guide on accessible colour contrast · Check any colour pair for WCAG contrast · Install for offline use
Frequently asked questions
How do I make a QR code for a URL?
Paste the full address, including https://, into the content field and the encoder turns it into byte mode. Choose an error-correction level of M for a screen and Q or H for print, then download the PNG at the pixel size you need or the SVG for a version that scales to any size.
Which error-correction level should I use?
L is the smallest symbol and tolerates about 7% damage. M at 15% is the usual default for screens. Q at 25% and H at 30% suit print, packaging and anything carrying a logo. Each step up needs a larger version, so the same content produces a denser code at H than at L.
Can I put a logo in the middle of a QR code?
Yes, and the panel tells you what it costs. The logo hides real data modules, so the error-correction level has to be able to rebuild them. Keep the logo near 20% of the code width, use Q or H, and read the coverage warning before you print. The SVG export carries the logo as an embedded data URL.
Will a coloured QR code still scan?
Usually, as long as the dark modules stay clearly darker than the background. The contrast readout applies the WCAG formula to your two colours and warns below 4.5 to 1 and refuses below 3 to 1. Avoid mid-tone greys and gradients, keep the finder patterns in the corners untouched, and never print light modules on a dark background.
What is the quiet zone and why does it matter?
The quiet zone is the empty margin around the symbol, measured in modules. The standard asks for four. Without it a reader cannot tell where the code ends, which is the most common reason a code that looks perfect refuses to scan. The margin control lets you set it from zero to sixteen modules.
Is anything sent to a server?
No. The encoder, the Reed-Solomon mathematics, the mask scoring, the canvas drawing and the file exports all run in this tab. Your content and your logo never leave the page, which also means the tool keeps working offline once the page has loaded.